Antiscalant and Dispersant for RO Membrane XT-0100 RO membrane system

Properties:

XT-0100 is a high-effective scale inhibitor. It is suitable for reverse osmose (RO), nanofiltration (NF), and ultrafiltration (UF) system. It can inhibit the scale deposit on the membrane surface, improve water quality, lower operation expanse. This product has the following properties:

(1). Inhibit inorganic scale formation for a wide concentration span. The largest permitted LSI value is 2.8 when no acid is added.

(2). Not flocculate with ferric oxide, alumina oxide, or silica oxide to form suspended substance;

(3). Inhibit the pollution from ferric, aluminum, or heavy metals pollutants. The permitted ferric concentration for inlet water supply can reach to 8.0ppm.

(4). Inhibit the flocculate and deposit of silica. The permitted silica concentration for the condense side can reach to 290ppm.

(5). Be used in CA, TFC, NF, and UF membranes for the RO system.

(6). Good solubility and stability.

(7). Effective in pH 5-10.

Specification:

Package and Storage:

200L plastic drum,IBC(1000L),customers’ requirement.The original package is 8 times condense liquid, 5 gallon (27.55kg) per barrel. After diluting 8 times, 220.4kg per barrel.

Usage Method:

The dosage is determined by water quality analysis and the condition of the reverse osmose system. Most scales can be under control in the recommended range of dosages, such as calcium carbonate, calcium sulfate, barium sulfate, ferric hydroxide, aluminum hydroxide, and silica.

The following formula can be used to calculate the TH-0100 volumes required to add to the medicine box:

where: U—— condense liquid volumes required, Litre, (L)

Q—— reverse osmose water supply flow, tons/hour (T/h)

a—— dosage required, gram/ton, (ppm, g/T) (standard liquid)

V—— the effective volume of medicine box, liter (L)

ρ—— density of the TH-0100, kg/L, the density is 1.45

x—— the actual flow of medicine operation pump, liter/hour (L/h)

1000 —— conversion coefficient

8 —— condense index